---
title: Set up L2TP/IPSec on Windows 10/11
slug: docs/configuration/l2tp-ipsec/set-up-l2tp-ipsec-on-windows-10
description: IPBurger's proxies and VPNs effortlessly support multiple protocols, including the widely-used legacy VPN Protocol L2TP/IPSec. Explore this guide to establish a connection to IPBurger's proxies or VPN using L2TP/IPSec on Windows 10.
image: https://cdn.images.archbee.com/FC0xAeEqHOavqUgR8jG90/cFTnAyivkiwchF-WHWieX_ipburger-doc.webp
createdAt: 2023-12-11T11:30:45.543Z
---

L2TP/IPSec is a widely used legacy VPN Protocol and it supports most operating systems. It is very easy to set up directly on the OS and doesn’t require any additional software installation.

## Requirements

- Operating System- Windows 10/11
- An active Plan/Service on [IPBurger.com](https://secure.ipburger.com/)
- Unrestricted Internet.

## Leak Prevention

- **[Disable IPv6.](https://www.ipburger.com/docs/troubleshooting/disable-ipv6)** 
- **[Prevent DNS Leaks](https://www.ipburger.com/docs/troubleshooting/prevent-dns-leaks-on-windows-8-10)**

## Connect to VPN with L2TP/IPSec

### 1. Get L2TP/IPSec Credentials for your IP address

L2TP/IPSec uses L2TP/IPSec protocol. Find your L2TP/IPSec Credentials from your Service Page.

Further steps shows how to get credentials for:

:::ExpandableHeading{isOpen="true"}
***Fresh/Dedicated Proxies***

[Login to your account](https://secure.ipburger.com/clientarea.php), and find the IP address/Service you want to use.



![](https://www.ipburger.com/wp-content/uploads/2021/04/My-Dedicated-IP-4.png)

Select **L2TP/IPSec&#x20;**&#x75;nder Proxy Credentials.

![](https://lh7-rt.googleusercontent.com/docsz/AD_4nXfcHgTnfDSZF-4Qm6q7JjD3f4QwyGGCF9-yWcbjBd2WzavSBV1VcZE6qcTG_lfOo4P8nQzBC2nn2OmzVLWGUK8ANHuYhYaaEAIw5JtPtw3ULskWjfi08tsPFVqFDQ1-s7CnS7TN?key=pT5O5pKrbTjrxPHXPEva6_P0)

These are your VPN Credentials.


:::

:::ExpandableHeading{isOpen="true"}
***Personal VPN***

Access your VPN Service [here](https://secure.ipburger.com/clientarea.php?action=services). Click on the **Manage** button.



![](https://www.ipburger.com/wp-content/uploads/2021/04/My-Account-IPB-17.png)

 Click on the **Download VPN Credentials&#xA0;**&#x62;utton and select **L2TP/IPSec**.



![](https://www.ipburger.com/wp-content/uploads/2021/04/My-Account-IPB-19.png)

 



![](https://www.ipburger.com/wp-content/uploads/2021/03/download_vpn.png)

Select a **location**.



![](https://www.ipburger.com/wp-content/uploads/2021/04/My-Account-IPB-21.png)



![](https://www.ipburger.com/wp-content/uploads/2021/04/My-Account-IPB-24.png)

These are your VPN Credentials.


:::

### 2. Configure L2TP/IPSec in Windows

Go to **Control Panel** and open the **Network and Sharing Center&#xA0;**&#x6D;enu.



![](https://www.ipburger.com/wp-content/uploads/2021/03/network_and_sharing.png)

Click on the **Set up a new connection or network&#xA0;**&#x6C;ink.



![](https://www.ipburger.com/wp-content/uploads/2021/03/setup-1.png)

Select the **Connect to a workplace&#xA0;**&#x61;nd click **Next.**



![](https://www.ipburger.com/wp-content/uploads/2021/03/connect_to_a_workplace.png)

Select the  **Use my Internet Connection (VPN)&#xA0;**&#x6F;ption.



![](https://www.ipburger.com/wp-content/uploads/2021/03/Use_my_Internet.png)

Copy-paste the **Internet Address (Host Name)** from your L2TP/IPSec Credentials. Provide some friendly **Destination Name**, like **IPBurger, and click Create.**

![](https://lh7-rt.googleusercontent.com/docsz/AD_4nXenF2hKAN5OFg82BXvn6H3g0VrH8h52y1ptrdTMcW2K4WVR9lIGQzd4rydwVMk4HiAz-1-xxVkCVZTzE962WGRYJgwGFs1R25UNCOYmXuLcq6nIEkCcoPteqaWcgZxfLJXjF-J0Bw?key=pT5O5pKrbTjrxPHXPEva6_P0)

Open the **Network and Sharing Center** again and select the **Change adapter settings**.



![](https://www.ipburger.com/wp-content/uploads/2021/03/change_adapter_settings.png)

Right-click on the new connection that you have just created. It should appear with the name you have given in the previous step. Click on the **Properties** option.

Select **Properties**.



![](https://www.ipburger.com/wp-content/uploads/2021/03/Properties.png)

Navigate to the **Security** tab and do the settings as shown below.

1. In the *Type of VPN*, choose **Layer 2 Tunneling Protocol with IPsec (L2TP/IPsec)**
2. Select the **Allow these protocols.**
3. Tick the **Unencrypted password (PAP)**
4. Tick the **Microsoft CHAP Version 2 (MS-CHAP v2)**

Double-check all the settings as they are crucial to connect to your VPN.



::Image[]{src="https://www.ipburger.com/wp-content/uploads/2021/03/security.png" size="70" width="360" height="473" position="center" showCaption="false"}

On the same window, click on **Advanced Settings**.



::Image[]{src="https://www.ipburger.com/wp-content/uploads/2021/03/advance_settings.png" size="70" width="361" height="473" position="center" showCaption="false"}

Select **Use preshared key for authentication**, copy-paste the data from your L2TP/IPSec Credentials, and click **OK**.

![](https://lh7-rt.googleusercontent.com/docsz/AD_4nXfoPyFh4yXwo6JbNZuVUXO3hVnSyhK_1teKGCGV34VHbAqA8VlYih0EHVDlN8h184tuZd64TESLdTDo_MQIlXBI9ltmTkTJgkLS9GjKY9pIVwiDFxmx3gRH52phHHcwxCUOCRbz?key=pT5O5pKrbTjrxPHXPEva6_P0)

::Image[]{src="https://www.ipburger.com/wp-content/uploads/2021/03/type_of_VPN.png" size="70" width="362" height="473" position="center" showCaption="false"}

### 3. Connect to VPN

Open the WiFi menu from the bottom tray.



::Image[]{src="https://www.ipburger.com/wp-content/uploads/2021/03/connect_to_VPN.png" size="68" width="408" height="322" position="center" showCaption="false"}

Click on the VPN connection we created and connect to it.



::Image[]{src="https://www.ipburger.com/wp-content/uploads/2021/03/VPN_connection.png" size="50" width="366" height="584" position="center" showCaption="false"}

Copy-paste the **Username** and **Password** from your L2TP/IPSec Credentials.&#x20;



If it does not connect or takes too long to connect, open the **Settings** from the ***Start*** menu.

![](https://lh7-rt.googleusercontent.com/docsz/AD_4nXdOwl0VLgclCvnMaKXZUkqrhNgfWxc2chruCvMBAR1RVDdy32raw3LJTEPVvdbsv1yWBPSMGC8AK2x9zxuxP-3BQgtjPLUeRCxjI9WVxEHC41p_xWts39ePSkiVYrLIHfbM1BPX8g?key=pT5O5pKrbTjrxPHXPEva6_P0)

::Image[]{src="https://www.ipburger.com/wp-content/uploads/2021/03/open_settings.png" size="50" width="289" height="623" position="center" showCaption="false"}

Select **Network & Internet.**

Select **VPN** in the left panel and click on the VPN ‘IPBurger’ we just created and click on connect. Enter username and password when asked for. It should connect well.

![](https://www.ipburger.com/wp-content/uploads/2021/03/windows_settings.png)



![](https://www.ipburger.com/wp-content/uploads/2021/03/VPN.png)

Now you are connected to IPBurger VPN.

If you are having issues connecting, please [contact our Support](https://secure.ipburger.com/support), we are happy to help!

## Next Steps

### Kill Switch

Kill Switch blocks you from exposing your Real IP Address, if the VPN Connection ever drops.

To Setup, please follow the guide below: 

:::CtaButton{label="Kill Switch for VPN" docId="L8ueNYgZv4mZljAJzw8yF" openInNewTab="true"}

:::

### Perform Leak Tests

Please follow:

:::CtaButton{label="IP, DNS and WebRTC Leak Tests" docId="S7wxkomJ93NvzjXQYM5Rz" openInNewTab="true"}

:::

### Multiple Accounts

You can easily set up multiple Business Accounts with Multiple IP Addresses from IPBurger.

Please follow:

:::CtaButton{label="Set up multiple user accounts" docId="DMn1wG8gOwY5vaV_RkWTA" openInNewTab="true"}

:::

For any queries, feel free to [reach out to our Support](https://secure.ipburger.com/support), we are happy to help!
