---
title: ProxyTool Integration Guide for IPBurger Proxies
slug: docs/proxytool-integration-guide-for-ipburger-proxies
createdAt: 2026-10-29T17:11:43.145Z
---

This guide will walk you through connecting your IPBurger proxy to ProxyTool, verifying your proxy connection and exit location, and routing selected applications through your IPBurger proxy.

## Before You Start

Make sure you have:

✔️ Installed [ProxyTool](https://proxytool.app/) on your Windows, macOS, or Linux device

✔️ An active IPBurger proxy

✔️ The application you want to route through your proxy

✔️ Your proxy details:

• Host / IP Address
• Port
• Username
• Password
• Proxy protocol (HTTP, HTTPS, or SOCKS5, depending on your IPBurger plan)

You can find these inside your IPBurger [dashboard](https://www.secure.ipburger.com/clientarea.php?action=services). Below is a sample view of the IPBurger dashboard:

![](https://api.archbee.com/api/optimize/FC0xAeEqHOavqUgR8jG90/daEKVMlF8pSnj7DTwczt2_proxy-credentials.png)

***⚠️*** The dashboard interface may vary slightly depending on your purchased proxy type.

## Step-by-Step Setup

### 1️⃣ Open ProxyTool

- Launch the ProxyTool application on your device.
- Download ProxyTool: https\://proxytool.app/

### 2️⃣ Add Your IPBurger Proxy

- Open the Proxies section and click Add Proxy.
- Enter your proxy details using the endpoint format provided by IPBurger.

Example proxy string:

socks5://username\@provider-endpoint

Replace the example values with your actual IPBurger proxy credentials.

![](https://api.archbee.com/api/optimize/FC0xAeEqHOavqUgR8jG90/_zkwgqunakv1X-Y6ez6Gq_image.png)

Tip: Use a clear, descriptive proxy name, such as Canada Residential.

Important: Keep your proxy endpoint and credentials private. Always mask passwords in screenshots.

### 3️⃣Test the Proxy Connection

- Run the built-in proxy check.
- The test provides information about the protocol, authentication status, latency, and detected exit location.

![](https://api.archbee.com/api/optimize/FC0xAeEqHOavqUgR8jG90/1a3ow6RHN-zu3YGWv1Jlz_image.png)

Verify that the detected IP address and country match your expected IPBurger proxy details.

### 4️⃣Route an Application Using a Manual Rule

- Open the Rules section and add a new rule.
- Configure the rule to:
  - Select the application or process you want to route.
  - Choose the appropriate proxy action.
  - Select your configured IPBurger proxy.
  - Configure any additional host or port conditions required.

![](https://api.archbee.com/api/optimize/FC0xAeEqHOavqUgR8jG90/aIj2TZhfv__mgzMdk9Sx9_image.png)

- Save or enable the rule.

Tip: Keep the Default rule last so unmatched traffic follows your normal connection, as recommended by ProxyTool.

### Alternatively, Use ProxyTool AI

Describe your desired routing configuration in plain language.

Example:

Hey, route Discord through Canada Residential.

Review the proposed proxy and routing rule, then select Create rule.

![](https://api.archbee.com/api/optimize/FC0xAeEqHOavqUgR8jG90/eQe_Xcmez7fWbW8pbHsG0_image.png)

Always review the proposed configuration before applying it.

### Verify Your Application's IP Address

Activate the routing rule and open the application you configured.

Visit https\://www\.ipburger.com/ where applicable to check the outgoing IP address and location.

Confirm that the detected details match your expected IPBurger proxy.

## ✅ You’re All Set

Your IPBurger proxy is now configured in ProxyTool. Your selected application should route traffic through the proxy according to your active routing rules.



